FLUKE 9500 3.2 GHz Oscilloscope Calibrator w/ 9530 Test Head - CALIBRATED!

Description

Powered by
Frooition
Shop Categories
Amplifiers
Analyzers
Cable & Antenna Analyzers
Cables
Calibration Kits
Calibrators
Counters / Timers
Detectors
Emulators
Error Detectors
Logic Analyzers
Meters
Modules / Plug Ins
Multimeters
Network Analyzers
Noise Generators
Noise Sources
Optical
Optical Spectrum Analyzers
Oscilloscopes
Other
Pattern Generators
Power Meters
Power Sensors
Power Supplies
Probes
RF / Microwave
Service Monitors / Test Sets
Signal Analyzers
Signal Generators
Spectrum Analyzers
Thermal Imagers
VXI
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
FLUKE 9500 3.2 GHz Oscilloscope Calibrator w/ 9530 Test Head - CALIBRATED!
Item Description
FLUKE 9500 3.2 GHz Oscilloscope Calibrator w/ 9530 Test Head - CALIBRATED
!
You are bidding on a FLUKE 9500 3.2 GHz Oscilloscope Calibrator with Fluke 9530 Test Head. It has Option 3200 (
3.2 GHz High-Performance Oscilloscope Calibration Capability) and Option 100 (High Stability / Accuracy Crystal Reference) installed.  Both the 9500 calibrator and 9530 Active Test Head
will arrive with a fresh calibration performed by an ISO 17025 accredited lab.
The 9500 is an oscilloscope calibrator from Fluke / WaveTek. Engineers may need a sound level calibrator, radio frequency calibrator, power-meter calibrator, voltage-current calibrator, or another type for electronic test equipment calibration. Electronic calibrations are necessary for maintaining your equipment for general monitoring and testing purposes.
Features:
DC Voltage
Amplitude: ±1mV to ±200V into 1MΩ; ±1mV to ±5V into 50Ω
Accuracy: ± (0.025% + 25μV)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Deviation: ±11.2%
Squarewave
Amplitude
Range: 40μV to 200V pk-pk into 1MΩ; 40μV to 5V pk-pk into 50Ω
Polarity: Positive, negative or symmetrical about ground
Accuracy (10Hz to 10kHz): <1mV ± (1% + 10μV); 1mV-21mV ±(0.10% + 20μV); 21mV-556mV ±(0.10% + 1μV); 556mV-210V ±(0.05% + 1μV)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Deviation: ±11.2%
Rise/Fall Time: <100V <150ns; 100V <200ns
Aberrations: <2% peak for first 500ns
Frequency Range: 10Hz to 100kHz
Accuracy: ±10ppm (±0.25ppm with Option 100)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Low-Edge Pulse
Amplitude
Range: 5mV to 3V pk-pk into 50Ω
Accuracy: ±3%
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Deviation: ±11.2%
Rise/Fall Time: 500ps return to ground
Mark/Space Ratio: 1:9
Aberrations: <2% peak for first 10ns; <0.25% peak 10 ns to 1μs; <0.1% peak beyond 1μs
Frequency Range: 10Hz to 2MHz
Accuracy: ±10ppm (±0.25ppm with Option 100)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
High-Edge Pulse
Amplitude
Range: 1V to 200V pk-pk into 1M½
1V to 5V pk-pk into 50½
Accuracy: ±3%
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Deviation: ±11.2%
Rise/Fall Time: <100V <150ns; >=100V <200ns
Mark/Space Ratio: 1:1
Aberrations: <2% peak for first 500ns; <0.1% peak 500ns to 100μs; <0.01% peak beyond 100μs
Frequency: 10Hz to 100kHz
Accuracy: ±10ppm (±0.25ppm with Option 100)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Fast-Edge (only available on Model 9520 and Model 9530 Active Heads)
Amplitude
Range: 5mV to 3V pk-pk into 50Ω
Accuracy: ±3%
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Deviation: ±11.2%
Rise/Fall Time: 150ps return to ground
Mark/Space Ratio: 1:9
Aberrations: <3% peak for first 1ns; <2% peak 1 ns to 10ns; <0.25% peak 10 ns to 50ns
Frequency:
Range: 10Hz to 2MHz
Accuracy: ±10ppm (±0.25ppm with Option 100)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Timing Markers
Styles: Square/Sine, Pulse or Narrow Triangle
Square/Sine Period Square: 10ns to 50s
Period Sine
9500/400 2.0ns to 10ns
9500/600 1.0ns to 10ns
9500/1100 0.5ns to 10ns
9500/3200 0.5ns to 10ns
Pulse
Period: 1μs to 50s
Rise/Fall Time: <700ps
Narrow Triangle
Period: 1μs to 50s
Rise/Fall Time: 2.5% of period
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous for period of all waveshapes
Timing Accuracy:
Normal: ±10ppm
With Option 100: ±0.25ppm
Timing Jitter: ≤10ps pk-pk
Deviation: ±45% for period
Amplitude: 100mV to 1V pk-pk
Sub-Division: Every10th marker can be set to higher amplitude for periods ≥1μs for all waveshapes
Leveled Sine and Dual Sine
Frequency Range:
9500/400 0.1 Hz to 400 MHz
9500/600 0.1 Hz to 600 MHz
9500/1100 0.1 Hz to 1.1 GHz
9500/3200 0.1 Hz to 3.2 GHz
Accuracy:
Normal: ±12ppm
With Option 100: ±0.25ppm for f ≥12kHz; ±3ppm max for f < 12kHz
Deviation: ±11.2%
Amplitude (Leveled Sine into 50Ω):
0.1Hz - 550MHz 4.44mV to 5.560V pk-pk
550MHz - 2.5GHz 4.44mV to 3.336V pk-pk
2.5GHz - 3.2GHz 4.44mV to 2.224V pk-pk
Accuracy ±1.5% at 50 kHz
Flatness (Leveled Sine relative to 50kHz):
0.1Hz - 100MHz ±1.5%
100MHz - 550MHz ±3%
550MHz - 1.1GHz ±4%
1.1GHz - 3.2GHz ±5%
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Sine Purity
2nd Harmonic <-35dBc
3rd Harmonic <-40dBc
All Other Spurious
Signals <-40dBc (typical)
Input Impedance
Resistance Measurement:
Range: 10Ω-150Ωand 50kΩ-12MΩ
Accuracy:
Ω10-40 ±0.5%
40 - 90 ±0.1%
90-150 ±0.5%
50k - 800k ±0.5%
800k - 1.2M ±0.1%
1.2M -12M ±0.5%
Capacitance Measurement:
Range: 1pF to 95pF
Accuracy: 1pF - 35pF 2% ± 0.25pF; 35pF - 95pF 3% ± 0.25pF
Current
Amplitude:
DC: ±100μA to ±100mA
Squarewave: 100μA to 100mA pk-pk
Accuracy: ± (0.25% + 0.5μA)
Frequency: 10Hz to 100kHz
Accuracy: ±10ppm (±0.25ppm with Option 100)
Ranging: 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuous
Composite Video Output
Amplitude: 1.0V, 0.7V, 0.3V
Pattern: White, Grey or Black
Sync Polarity: Positive or negative
Standards: 625-line 50Hz or 525-line 60Hz
LF Linear Ramp
Waveforms: 1V pk-pk symmetrical triangle
Ramp Time: 1ms to 1s
Overload Pulse
Amplitude: 5V to 20V into 50½
Polarity: Positive or negative
Duration: 0.2s to 100s
Trigger: Manual
Zero Skew
Unadjusted Skew: ±50ps channel to channel
Adjusted Skew: ±5ps channel to channel
Frequency Range: 10Hz to 100MHz
Auxiliary Input
Signal Routing: Rear input to any Active Head
Maximum Input:
Voltage: ±40V pk-pk
Current: ±400mA pk-pk
Trigger
Amplitude: ≥1V pk-pk into 50Ω
Risetime: <700ps
Rate:
User Selectable: f (up to 120 MHz), f/10 or f/100
Free Run: 100Hz
Reference Frequency Input
Frequency Range: 1MHz to 20MHz in 1MHz steps
Level: 90 mV to 1V pk-pk (typical)
Lock Range: ±50ppm
Reference Frequency Output
Frequency: 1MHz or 10MHz
Level:
Into 50Ω: 1V pk-pk (typical)
Into 1MΩ: 2V pk-pk (typical)
Environment
Temperature:
Operating: 5°C to 40°C
Storage: 0°C to 50°C
Humidity: (non-condensing)
Operating: <90% over 5°C to 30°C
<75% over 30°C to 40°C
Storage: <95% over 0°C to 50°C
Power
Voltage: 95V to 132V rms or 209V to 264V rms
Frequency: 48Hz to 63Hz
Consumption: 400 VA
Warm-up: 20 minutes
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
our other auctions
for more great deals on test and measurement equipment.
Thank you and good luck bidding
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.  Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
Shipping
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
Terms
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Returns
Returns
Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project.  The verification of product capability is the sole responsibility of the buyer.  PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a minimum 20% restocking fee.  A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
More Items!
View more great items
Fluke / Wavetek 9100 Multifunction Calibrator with Accessories - CALIBRATED!
&dollar18,950.00
Fluke 6100A Electrical Power Standard / Calibrator with MFG Z540 CALIBRATION!
&dollar39,950.00
Keithley 263 5 1/2 Digit Calibrator / Source - CALIBRATED!
&dollar3,950.00
Fluke 5700A Multi Function Calibrator w/ Wideband Option 03 - CAL'D w/ TEST DATA
&dollar21,950.00
Powered by
Frooition
Frooition www.frooition.com | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.